The reality is that most water waste in irrigation occurs in the delivery systems, not on-farm. The key to conserving water on-farm is to make irrigation district operations more efficient. By better managing their conveyance systems, surface water irrigation districts can significantly reduce their water losses and more efficiently deliver water to producers.
HID has researched, tested and analyzed multiple methods for saving water. The biggest water savings come from HID’s use of tailor-made yet inexpensive technology to manage the process of moving about 52,000 acre-feet of water per year from the river to the farm.
Hands-on training in low-cost, off-the-shelf technology for improving district operations is available at the project's Rio Grande Center for Ag Water Efficiency.
HID has a fully automated system that integrates 40 miles of canal, 200 miles of pipeline, 37 automated gates, and 36 re-lift pump houses. Click here for a video about the District's improvements.
All components are networked by telemetry stations and remotely controlled from a master computer system, or SCADA (short for supervisory control and data acquisition). Canal riders and other personnel can access this secure network through any electronic communications device – cell phone, desktop or netbook – in order to check on the status of system components. This enables a rapid response to a variety of situations that can arise in an irrigation water delivery system. Historically, an overflow or a drained canal would not be corrected until the canal rider inspected the canal. Now, the sensors send signals through the telemetry that alert staff to a problem that needs attention. The remote telemetry system is capable of measuring, recording, delivering, and analyzing measurement data, such as the depth of water in a canal.
The lightweight aluminum gates are controlled by telemetry. They are raised and lowered by means of a common 12-volt actuator powered by solar panels and/or wind generators, ideal for remote areas not served by power lines. The gates are equipped with sensors that monitor water levels. Staff can set the gates to automatically open or close in response to changed levels, keeping the entire irrigation system charged and at an optimal performance level. For more information, check out the factsheet on telemetry and SCADA.
The network alerts HID staff to changing conditions. This is especially important in remote areas, where lateral canals can overflow easily. A single overflow can lose six to ten acre-feet of water in 24 hours. HID estimates that by preventing overflows, the automated system is saving 40 to 70 acre-feet of water per irrigation period – or as much as 200 acre-feet of water per year.
HID built its automated system using low-cost, off-the-shelf technology that can be easily replicated. El Paso Irrigation District and the Lower Colorado River Authority are early adopters of HID-engineered systems.
Click below for detailed drawings, specifications, instructions, and photos for fabricating, assembling and installing:
AW Blair Engineering developed the tools for automating district operations.